Safety
25
Pos: 29.1 /Überschri ften/Überschri ften 2/P-T/Sicherhei tsroutinen @ 187\mod_138 0089318480_78.doc x @ 1608182 @ 2 @ 1
4.4 Safety routines
Pos: 29.2 /Überschri ften/Überschri ften 3/K-O/Maschine sti llsetzen und sicher n @ 190\mod_1381323544614_ 78.docx @ 1624780 @ 3 @ 1
4.4.1 Stopping and securing the machine
Pos: 29.3 /BA/Sic herheit/3. Sicher heitsroutinen/Maschi ne stillsetzen und sic hern -gezogene Maschinen_ mit Feststellbre mse @ 244\mod_1395817975 869_78.docx @ 1909963 @ @ 1
WARNING!
Crush hazard due to movement of the machine or machine parts!
If the machine has not been shut down, the machine or machine parts may move
unintentionally. As a result, people may be seriously injured or killed.
• Before leaving the machine: Shut down and secure the machine.
To park the machine securely:
• Park the machine on a stable and even surface.
• Switch off the drives and wait until coasting parts have come to a standstill.
• Switch off the tractor engine, remove the ignition key and take it with you.
• Use the parking brakes to secure the machine and tractor from rolling away.
Pos: 29.4 /Überschri ften/Überschri ften 3/A-E/A/Angehoben e Maschine und Maschinen teile sicher unterbau en @ 190\mod_13813236627 99_78.docx @ 1624809 @ 3 @ 1
4.4.2 Supporting lifted machine and machine parts securely
Pos: 29.5 /BA/Sic herheit/3. Sicher heitsroutinen/Angehoben e Maschine und Maschinen teile sicher unterbau en_ALTE FORM @ 277\mod_14 04810762702_78.doc x @ 2077603 @ @ 1
WARNING!
Risk of injury due to movement of the machine or machine parts
If the machine is not supported securely, the machine or machine parts may roll, fall or drop.
As a result, people may be seriously injured or killed.
• Before working on or under raised components: Securely support machine or machine
parts.
To securely support the machine or machine parts:
• Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".
• Before performing any work on or under raised machine parts, lower the machine parts or
secure them mechanically with rigid safety supports (e.g. support stand, crane) or with a
hydraulic shut-off device (e.g. stop cock) to prevent them from dropping.
• Never support the machine or machine parts with materials which can buckle.
• Never support the machine or machine parts with hollow blocks or bricks. Hollow blocks or
bricks may break under continuous load.
• Never work under the machine or machine parts which are held up by a car jack.
Pos: 29.6 /Layout Mo dule /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
