KRONE ISOBUS Terminal
141
Insert new sheet if sheet is torn
Fig. 103 Comprima CF155XC Comprima CV150XC/CV210XC
Note
The basic screen “Sheet tear” is displayed in the event of a sheet tear alarm during wrapping.
• The softkey
0
can be used to release the holding arms.
• Insert the starting end of the sheet in the clamping device. (refer to chapter Operation
“Inserting Sheet”)
• Activate softkey
until the holding arms have reached the closed end position.
• Continue wrapping process by activating the softkey
GO
.
Pos: 48.99 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
