Krone Comprima CF 155 XC - Page 336

Maintenance – lubrication
336
Pos: 59.192.27 /BA/W artung/Rundballenpre sse/Schmierung/ Schmierplan/Tabel le Schmierstellen CF/CV rechts @ 122\mod_13448526 71213_78.docx @ 1122379 @ @ 1
Lubrication Points
Number of
Grease Nipples
Lubrication
Interval
1 Parking jack 1
50 h
2 Tandem axle pendulum arm bearing right/left 2
50 h
3 Bearing wrapping table 1
20 h
4 Cutting roller left 1
20 h
5 Nipple block left: Floor conveyor at front
Lower roller
Upper roller
1
1
1
20 h
6 Cylinder swivel table 1
20 h
7 Nipple block right/left: Rear rocker arm
Bearing drive shaft floor
conveyor rear
(Comprima CV150 /CV210
XC)
1
1
20 h
8 Cylinder bale lifter (only Comprima CF155 XC) 1
20 h
9 Tensioning rocker 1
20 h
10
Connection (sleeve/stub end) between main gearbox and
slipon gear
-
20 h
Pos: 59.193 /BA/Sic herheit/7. Gefahrenhin weise alt/Rundba llenpresse/WARNUNG Absperrhahn Hydraulik zyl geschlossen @ 308\mod_1416995034 289_78.docx @ 2391935 @ @ 1
WARNING! – Settings on the machine!
Danger to life or serious injuries.
• The shut-off valve on the left hydraulic cylinder must be closed.
Pos: 60 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1