Generate the Quick Response Card
Introduction
If you want to give users easy access to the printer from their mobile devices, you can generate
the [Quick Response Card]. The [Quick Response Card] contains all the information necessary to
establish a connection between the mobile device and the printer.
When to do
Print the [Quick Response Card] on individual cards or on a poster to provide easy access to the
printer.
Before you begin
You need to edit the settings for the connectivity information in Océ Express WebTools first. Only
a system administrator or power user can edit the information (see
Configure the Océ Express
WebTools settings for a mobile connection
on page 167).
NOTE
The illustration below is an example. You cannot print and use this [Quick Response Card] for
your personal printer. The printer generates a unique [Quick Response Card] with your own
personal QR Code based on your settings.
Illustration
[32] Example of a QR Card
Generate the Quick Response Card
Chapter 4 - Use the Océ PlotWave 750 to print
169
To Next Page
Loading...
Need help?
General