Oce PlotWave 750 User Manual

Turn on and off the controller
Procedure
1.
The printer can be in standby mode, in sleep mode or it can be turned off completely.
Press the On / Off key at the front of the printer to turn on the controller inside the printer. The
green LED turns on.
NOTE
This action only turns on the controller. Separately from this action, you can turn on the printer
and scanner.
2.
Press the On / Off key at the front of the printer to turn off the controller inside the printer. The
green LED turns off 30-60 seconds after you have pressed the key.
[10] On/Off button on the incorporated Océ PlotWave 750 Controller
Turn on and off the controller
44
Chapter 2 - Introduction

Oce PlotWave 750 Specifications

General

Brand	Oce
Model	PlotWave 750
Category	Printer
Language	English