Copy with removed filing strips along the leading and trailing strip
Procedure
1.
Open the ‘Sheet’ card in the ‘Original’ section.
2.
Press the “Remove strip” function key.
[99] Remove strip
3.
Adjust the values in mm for the trailing strip using the numeric or arrow keys.
4.
Press the “Remove strip” function key again.
5.
Adjust the values in mm for the leading strip using the numeric or arrow keys.
6.
Make other settings as required.
7.
Feed the original.
Copy with removed filing strips along the leading and trailing strip
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
267
To Next Page
Loading...
Need help?
General