Standard scale factor
Introduction
The Océ PlotWave 750 can scale (reduce and enlarge) the image to a defined format.
The overview below shows the scale factor if you need to copy on media of different sizes.
IMPORTANT
If you select the wrong scale factor you can lose information.
Supported DIN media series
The table shows the scale factor if you copy from one media size (original column) to another
media size (first row)
DIN table
Originals Standard scale fixed steps for the DIN media series [%]
A0 A1 A2 A3 36 Inch B1 B2
A0 100 71 50 35 109 84 59
A1 141 100 71 50 153 119 84
A2 200 141 100 71 218 168 119
A3 283 200 141 100 308 238 168
36 Inch 107 65 46 32 100 77 55
B1 119 84 59 42 129 100 71
B2 168 119 84 59 183 141 100
Generic ISO media series
The table shows the scale factor if you copy from one media size (original column) to another
media size
ISO table
Originals Standard scale fixed steps for the ISO media series [%]
A0 A1 A2 A3 A4 A5
A0 100 71 50 35 - -
A1 141 100 71 50 35 -
A2 200 141 100 71 50 35
A3 283 200 141 100 71 50
A4 400 283 200 141 100 77
A5 565 400 283 200 141 100
Standard scale factor
390
Chapter 11 - Supported media types and sizes for the printer
To Next Page
Loading...
Need help?
General