Oce PlotWave 750 - Available Settings for Copy Jobs

Available settings for copy jobs
Introduction
The Océ PlotWave 750 provides a lot of settings to manage all your different copy jobs. These
settings are used for extended copy jobs. The following table gives an overview and a very short
description of the available settings. A detailed description of each setting can be found in the
online help of Océ Express WebTools. You can change the default value of a setting that you use
very often in the copy template in Océ Express WebTools.
Available settings for copy jobs
The available settings for copy jobs – a setting can contain more than one setting.
Setting Function
[Original type] Define the type of original you use
[38] [Original type] (example)
[Scale] Scale an original
[39] [Scale] (example)
[Media] Define the type of media used
[40] [Media] (example)
[Lighter/darker] Make a lighter or darker copy
[41] [Lighter/darker] (example)
[Remove strip] Copy without strips
[42] [Remove strip] (example)
4
Available settings for copy jobs
190
Chapter 5 - Use the Océ TC4 scanner for copy and scan-to-file jobs