Oce PlotWave 750 User Manual

Océ Matrix Logic
What is Océ Matrix Logic
®
Introduction
Océ Matrix Logic
®
is a software application for the Océ PlotWave 750 multifunction system. It
allows you to easily create different copy set outputs from one set of originals scanned with the
Océ TDS600 scanner.
This software is available in the Standard Bundle license.
Workflow
Here are the steps to follow to compose and print a job with Océ Matrix Logic
®
:
NOTE
Some steps are mandatory whereas others are only optional as mentioned below.
1.
Download Océ Matrix Logic
®
from Océ Express WebTools and install it on a workstation
2.
Open Océ Matrix Logic
®
3. Scan a Matrix Job with the Océ TDS600 scanner
4. Create and save a template (optional)
5. Modify existing templates (optional)
6. Compose an Océ job
7. Add one or several templates
8. Add banners (optional)
9. Print the job
10. Follow the submitted job
11. Reprint the job (optional)
Download and install Océ Matrix Logic
®
on a workstation
1. In a web browser, open Océ PlotWave 750 Express WebTools
2. Go to the [Support] tab
3. In [About] go to the [Downloads] section
4. Click on [Matrix Logic]
5. Log in as a Key Operator
6. Run the file that is downloaded to install Matrix Logic on the workstation
Océ Matrix Logic is installed in the programme list.
Start Océ Matrix Logic
1. Select Matrix Logic in the Programme list
2. In the Matrix Logic pop-up window, enter the host name or IP address of the Océ system
Océ Matrix Logic application opens
Océ Matrix Logic
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
277

Oce PlotWave 750 Specifications

General

Brand	Oce
Model	PlotWave 750
Category	Printer
Language	English