Maintain the Océ TC4 scanner
Clean the scan area
Introduction
You need to keep the glass plate clean. A dirty glass plate causes a decreased copy and scan
quality. Clean the glass plate when you have lines on the image that are not on the original.
IMPORTANT
Use Océ cleaner A to get the best results.
IMPORTANT
Make sure you do not damage the sensor at the right of the glass plate.
Procedure
1.
Turn off the Océ TC4 scanner.
2.
Pull the top cover towards you and lift the top cover to open it.
[145] Open the top cover
3.
Clean the glass plate and the white plate with a lint-free cloth and a small quantity of the cleaner.
Maintain the Océ TC4 scanner
330
Chapter 8 - Maintain and troubleshoot the Océ PlotWave 750 system
To Next Page
Loading...
