Custom card start screen
Select the ‘Custom’ start screen in the following situations.
• If the scanner is often used by inexperienced users
• If you must perform many different scan and copy jobs with different settings.
In the ‘Custom’ start screen, you can press the green start key to start the original transport
immediately.
[69] Operator panel view with ‘Custom’ card section on the Océ TDS600 scanner
NOTE
The ‘Custom’ start screen is the ‘Custom card’ of Template 1. The key operator defines the
contents in the Océ Express WebTools.
Custom card start screen
226
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
To Next Page
Loading...
Need help?
General