Extended scan-to-file jobs
Available settings for scan-to-file jobs
The scan-to-file settings
Setting Description
[Destination] Use this setting to define the default destination for scan-to-file
jobs on the controller. You can define a maximum of 10 remote
destinations and one of these destinations is the default desti-
nation.
[File type] Depending on the color mode and file type you select the val-
ues for the compression mode and organization will change.
For some file types, the Compression and Organization settings
cannot be set in all situations. See
File type
on page 214.
Available file types:
• [TIFF]
• [TIFF Multipage]
• [PDF]
• [PDF Multipage]
• [JPEG]
[Resolution] Use this setting to define the resolution of the scanned images.
The higher the resolution you select, the finer the image quality
but the larger the file size. See
Resolution
on page 216.
[Original type] Use this setting to define the type of original for your scan-to-
file jobs. The defined type influences the quality of the output.
See
Original type and background compensation
on page 217.
[Original width] Use this setting to define the width of the original that the scan-
ner scans. See
Original width
on page 218.
[Remove strip] Use this setting to define blank areas on the sides of the scan-
ned image. See
Remove strip
on page 219.
[Mirror] Use this setting to create a mirrored image of an original. Mir-
roring occurs in the transport direction. (The image is mirrored
along the vertical axis.)
4
Extended scan-to-file jobs
212
Chapter 5 - Use the Océ TC4 scanner for copy and scan-to-file jobs
To Next Page
Loading...
