Oce PlotWave 750 User Manual

The counter
On the operator panel of the Océ PlotWave 750 printer, a counter is displayed to give the user
feedback about the progress of the job that is currently being printed. The counter, which is
located at the bottom of the upper window on the operator panel, displays the number of sets
and/or pages printed. Counting starts at 1.
The following information is available.
• When no sets are made, only the current page and the total number of pages are displayed
(e.g. “Page 3 of 5”). At the beginning of a job, when the system does not know the total
number of pages yet, only the current page may be displayed (e.g. “Page 5”).
• With set input: set counter. In this case the counter shows the current, the total number of sets
and the current page (e.g. “Set 3 of 5, Page 10”). At the beginning of a job, when the system
does not know the total number of sets yet, only the current set and page may be displayed
(e.g. “Set 2, Page 5”).
• With set input: multiple sheet counter. In this case the counter shows the current page, the
total number of pages and the current copy, e.g. “Page 2 of 12, Copy 5”). At the beginning of a
job, when the system does not know the total number of pages yet, only the current page and
copy may be displayed (e.g. “Page 2, Copy 5”).
Printer operator panel actions
On the Océ PlotWave 750 printer operator panel you can perform a limited number of actions in
the off-line menu. The tables below display the settings.
Offline menu options
Offline menu
Menu Secondary menu(s) Description
Language List of 2 languages You can toggle between the 2
main languages on the printer
operator panel. See Select a
language on page 38.
Offline folding (optional) Input
• Method
• Legend
All the settings except the
Special setting are job settings
that can be set for an individu-
al offline folding job. The de-
fault values for these settings
are set by the key operator in
the Océ PlotWave 750 Express
WebTools application.
Binding
• Binding
• Reinforce
Binding
• Edge
• On/Off
Package
• Width
• Length
Special
• Knife
4
Printer operator panel actions
32
Chapter 2 - Introduction

Oce PlotWave 750 Specifications

General

Brand	Oce
Model	PlotWave 750
Category	Printer
Language	English