How to clear a jam in the second fold section
Procedure
1.
Open the front door of the second fold section.
[161] Opening the front door of the second fold section
2.
Remove any jammed printing material at the bottom of the second fold section.
3.
Close the front door of the second fold section.
4.
If you have a belt unit, put the belt in an upright position.
[162] Putting the belt in an upright position
5.
Open the delivery unit.
[163] Opening the delivery unit
6.
Open the guide plate with the green lever.
How to clear a jam in the second fold section
Chapter 8 - Maintain and troubleshoot the Océ PlotWave 750 system
341
To Next Page
Loading...
Need help?
General