Oce PlotWave 750 - Use the scanner operator panel

Introduction
This chapter describes how to use the Océ TC4 color scanner.
Use the scanner operator panel
Introduction
Use the scanner operator panel to define the job settings. You can define the job settings in two
ways.
• Use the left soft keys and the scroll wheel.
You can use this method if you prefer a general step by step method.
• Use the scroll wheel and scroll-wheel key only.
You can use this method if you prefer a fast method.
Note that the scanner operator panel also uses icons to explain a setting. The following
illustration shows the scanner operator panel.
Illustration
1
2
3
4
5
6
7
8
9
0
3
5
6
11
4
1
2
7
8
10
9
12
[34] The TC4 Scanner operator panel
Use the scanner operator panel
178
Chapter 5 - Use the Océ TC4 scanner for copy and scan-to-file jobs