Configure the network and security settings
Introduction
For complete and detailed connectivity information for your Océ System, refer to the 'Large
Format Systems Connectivity Manuals' available on http://global.oce.com.
For complete and detailed security information for your Océ System, refer to the 'Océ PlotWave -
ColorWave Systems Security Manual' available on http://global.oce.com.
Configure the network settings in Océ Express WebTools
How to configure the network adapter in Océ Express WebTools
Introduction
Some of the network settings are configured during the installation of your system. If you want to
change the initial configuration or if you want to define more network settings, you can do so in
the [Configuration] tab.
NOTE
Before you can edit a setting or a settings group, you must log on as System administrator or
Power user.
Procedure
1.
Click [Configuration] - [Connectivity].
2.
Click [Edit] in the [Network adapter] settings group bar to access the [Network adapter] window.
You can edit all the settings of the settings group in one window.
or
3.
To edit only one setting, click a single setting value in the expanded list.
Configure the network and security settings
Chapter 3 - Define your workflow with Océ Express WebTools
79
To Next Page
Loading...
