Log in as an authorized user
Purpose
In order to have write access for certain groups of settings, you must log in as an authorized user.
There are 3 user roles, System administrator, Key operator and Power user who have
authorization to edit specific groups of settings. You do not need to log in before you start a
session. The system will only display a message when you need to log in to perform an action.
Before you begin
Navigate through the tabs and select the value of a setting you wish to change.
Procedure
1.
After you click the value of the setting you want to edit, a log in window appears.
2.
You can select a user role from the drop down list.
NOTE
The user role with the required authorization is already selected.
3.
Enter the password.
NOTE
If the password is entered incorrectly, a message appears. You can enter the password again.
4.
Click [Ok] to confirm your entry.
NOTE
Once you have logged in, the log in lasts for the duration of the browser session. If you have not
been active for more than 30 minutes, the session expires and you need to login again.
NOTE
For security reasons it may be useful to periodically change the password for the 3 access
modes (Key operator, System administrator, Power user) to the Océ Express WebTools.
Log in as an authorized user
Chapter 3 - Define your workflow with Océ Express WebTools
83
To Next Page
Loading...
Need help?
General