Preferred Océ media types and sizes
Introduction
Océ machines and media are matched for the best quality and performance. Océ recommends
the use of approved Océ media. You can receive a full list of the Océ media that you can use in
your printer (that includes plain or recycled paper, transparent paper, colored papers and
different polyester films) from your Océ PlotWave 750 representative.
You can select one of the media names listed in the tables below on:
• the local user interface
• Océ Express WebTools
•
the Océ Wide format Printer Driver for Windows
®
(WPD2)
•
the Océ PostScript
®
3 Driver
• Océ Publisher Express
• Océ Publisher Select
• Océ Publisher Mobile
IMPORTANT
Do not store the paper in rooms where temperature and humidity are high. Avoid dust and
direct sunlight. Wrap not used paper in plastic to prevent it from absorbing moisture.
Media category: papers
Select the following media name on
your user interface
US names
[Bond 17 lb] Bond 17 lb
[Bond 20 lb] Bond 20 lb
[Bond 24-28 lb] Bond 24-28 lb
Media category: transparencies and films
Select the following media name on
your user interface
US names
[Transparent 20 lb] Transparent 20 lb
[Transparent 24 lb] Transparent 24 lb
[Transparent 28 lb] Transparent 28 lb
[Film 3-3.5 mil] (Film 88 µm) Film 3-3.5 mil
[Film 4-4.5 mil] (Film 123 µm) Film 4-4.5 mil
[Vellum] [Vellum]
Media sizes
Maximum
Minimum
Media width 914 millimeters
36 inch
279 millimeters
11 inch
4
Preferred Océ media types and sizes
Chapter 9 - Support
365
To Next Page
Loading...
Need help?
General