Remote Security
[Remote security]
Introduction
By default, the first certificate delivered for the use of HTTPS is an Océ self-signed certificate.
To ensure a fully trusted authentication, you can request and import a certificate delivered by a
Certification Authority (CA-signed certificate). In Océ Express WebTools you can generate the
certificates.
When you use a certificate, the client station that submits the print can check the identity of the
controller.
Remote security: certificates
• By default, Océ delivers an Océ self-signed certificate. This certificate provides encryption of
the print data between the client and the controller. It can be easily used.
This self-signed certificate has not been signed by a Certification Authority, consequently the
web browser will display a 'Certificate Error' message the first time you use the HTTPS
protocol.
• When your security policy recommends it, the administrator can request and import a
certificate delivered by a Certification Authority (CA-signed certificate).
For more information on how to do this, see
Generate a new CA-signed certificate request
on
page 0 , and
Import a CA-signed certificate: import the root certificate
on page 95.
NOTE
The [Remote security] feature is limited to [Reset certificate] functionality when you use it from
the controller monitor (configuration where a keyboard and monitor are plugged on the printer
controller).
Remote Security
92
Chapter 3 - Define your workflow with Océ Express WebTools
To Next Page
Loading...
Need help?
General