The Océ PlotWave 750 components
Introduction
The Océ PlotWave 750 is available as a digital network printer, a printer and scanner or as a full
combination which can print, copy or scan-to-file and finish the output.
You can combine the printer with 1 scanner at a time
The Océ PlotWave 750 consists of the following components.
These components, in combination with your network, Océ Publisher Select, Océ Publisher
Mobile, Repro Desk
®
, and one or more drivers (WPD2, PS3), allow you to use the Océ PlotWave
750 as your default enterprise print and copy solution.
See the Océ Large Format Systems Connectivity Manuals for more details about configuring
networking settings on the Océ PlotWave 750 printer. You can find more information about
installing, configuring and using drivers in the documentation provided with the drivers.
NOTE
All Océ drivers for the Océ PlotWave 750 are available for download from the Internet at
www.oce.com.
The Océ PlotWave 750 printer
[5] The printer with 3 drawer configuration (6 rolls) and one cut sheet tray
The Océ PlotWave 750 printer incorporates two rolls with the ability to upgrade up to a 6 roll
configuration, and 2 cut sheet trays. The printer delivers your jobs on the top delivery tray.
You can buy the following optional devices.
• a roll loader
• one or two cut sheet trays
• the Océ Delivery Tray
• a folder to fold the output (first fold, second fold)
• a reinforcement unit to add a reinforcement strip to the folded output
The Océ PlotWave 750 components
28
Chapter 2 - Introduction
To Next Page
Loading...
Need help?
General