Templates start screen
Select the ‘Templates’ start screen in the following situations.
• if the scanner is often used by experienced users
• if you must perform many scan and copy jobs with similar settings.
In the ‘Templates’ start screen, first select a template and then start the original transport with the
green start key. To display the ‘Templates’ section immediately, press ‘Job definition’.
[70] Operator panel view with ‘Templates’ start screen on the Océ TDS600 scanner
Templates start screen
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
227
To Next Page
Loading...
