Oce PlotWave 750 - Save the Settings in a File

Save the settings in a file
Purpose
Save the settings and the values that you configured in the Océ Express WebTools in a file.
When to do
• Duplicate the settings very easily to another printer of the same type.
NOTE
Not all settings are stored in the settings file. The network settings are excluded from the file
because the network settings cannot be transferred to another printer. The passwords for
authorized users and the passwords for remote scan destinations are excluded from the file for
security reasons. License information is not included in the file either.
Procedure
1.
Click the [Configuration] tab or the [Preferences] tab.
2.
Click [Save set] in the top-right hand corner of the screen. A secondary window is opened.
3.
Navigate to a location where you want to store the file.
4.
Save the settings<hostname of printer><date>.xml file. The file name is not fixed. You can
change the name if required.
5.
Click [Ok] to confirm or [Cancel] to close the window without storing the settings file.
Save the settings in a file
Chapter 3 - Define your workflow with Océ Express WebTools
75