Mirror
Purpose
You can use the “Mirror” option to scan a horizontally mirrored image of an original. Mirroring is
performed in the vertical axis.
Illustration
[93] Mirror setting
Procedure
1.
Select the “Image” card in the “File” section.
2.
Select Mirror with the function key.
• On. The original document is a mirror image. The scanner mirrors this image in the vertical
axis to create a normal image.
• Off. The original document is not a mirror image and therefore does not have to be converted.
Mirror
258
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
To Next Page
Loading...
