Toner level indication
Introduction
The toner level is indicated in the [System] monitor in Océ Express WebTools. The toner level is
represented by an illustration under the [System ] tab.
IMPORTANT
Only use Océ PlotWave 750 toner. Make sure you have the correct region version.
IMPORTANT
You can only add one bottle of toner. If you add more than one bottle, the developing unit will
flood.
IMPORTANT
The printer must be turned on to add the toner.
IMPORTANT
Shake well the bottle with the toner.
Toner level indication
Toner level
Indication Description Illustration
1. [Toner availa-
ble]
Enough toner is available in the machine to
continue printing.
2. [Toner low] Little toner is available in the machine.
• The printer continues printing.
• The operator attention light turns yellow.
• New toner can be added, but you can also
still continue printing for a while. This de-
pends on the toner coverage of your jobs.
• The printer will indicate when to refill toner.
4
Toner level indication
56
Chapter 3 - Define your workflow with Océ Express WebTools
To Next Page
Loading...
Need help?
General