Deliver originals after scan jobs
Introduction
You can choose for delivery of the original to be at the front (rewind) or the back side of the
scanner.
Attention: The “Rewind” function is disabled when the optional Océ Delivery Tray is installed.
NOTE
When you copy thick or very thin originals, originals that are damaged or originals in a carrier
sheet, it is recommended to use the output at the back side of the scanner to ensure correct
delivery (“Rewind” function off).
Procedure
1.
Select the “Preference” section.
2.
Press the ‘Rewind original’ function key to make your selection:
• On: Originals are delivered at the front of the scanner. You have to collect each original by
hand.
• Off: Originals are delivered at the back of the scanner.
Deliver originals after scan jobs
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
239
To Next Page
Loading...
