Destination
Introduction
You can store your scanned file either in the temporary store on the controller or on a network
destination. You can define up to ten destinations in the Power Logic
®
Controller application. On
the scanner operator panel, you can choose one of these destinations. The destination can be a
local destination. This means that the files are stored on the Power Logic
®
Controller. The
destination can also be a remote destination. This means that you can send scanned files to a
workstation that is connected to the same network as the printer.
Procedure
1.
Press the function key to select destination 1 to 4.
2.
To select destination 4 to 10, you must first select destination 4. Press the arrow keys to select
destination 4 to 10.
NOTE
The destinations can have any name. However, for your convenience, you are able to define
understandable names in the Power Logic
®
Controller application.
Destination
252
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
To Next Page
Loading...
Need help?
General