Brightness
Introduction
You can change the brightness of a print or copy by modifying the exposure of the scanner. The
exposure can be set to lighter and darker.
Procedure
1.
Press the ‘Exposure’ function key and use the arrow keys to set the exposure as desired.
The up and down arrow keys can be used to gradually increase or decrease the exposure setting.
The left or right arrow keys can be used to go to the highest or lowest available exposure level at
once.
If you want to go from any negative value to the highest possible positive value, or vice versa,
you have to press the appropriate left or right key twice.
Brightness
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
269
To Next Page
Loading...
Need help?
General