Stamping
Introduction
Stamping is an Océ PlotWave 750 option which allows you to print a predefined text on all your
copies. The key operator predefines the stamps in the Océ Express WebTools.
You can select one stamp per original and you can select a color, font size or position. A stamp
can consist of the following parts:
• predefined text
• date
• time
Procedure
1.
Open the ‘Stamping’ card in the ‘Print’ section.
2.
Select stamp ‘On’ with the ‘Enable’ function key.
3.
Select a stamp with the ‘Select stamp’ function key.
NOTE
The following steps are optional.
4.
Select a color with the ‘Format stamp’ function key and the arrow keys.
5.
Select a “Size” with the “Format stamp” function key and the arrow keys.
6.
Select a position with the ‘Stamp position’ function key and the arrow keys.
Stamping
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
245
To Next Page
Loading...
Need help?
General