Steps in an extended scan-to-file job without fine tuned job templates
Procedure
1.
Feed the original.
2.
Select [Scan].
3.
Define the scan-to-file job settings at the scanner operator panel.
• Open a template.
• Select the first setting and define the value.
• Select the second setting and define the value.
• ....
• Select the last setting and define the value.
4.
Press the green start key.
Result
The second step takes several additional actions.
Steps in an extended scan-to-file job with fine tuned job templates
Procedure
1.
Feed the original.
2.
Select [Scan].
3.
Define the job settings.
Select the required template at the scanner operator panel and change the predefined settings
only if necessary.
4.
Press the green start key.
Result
You get a tuned digital file of your original.
Steps in an extended scan-to-file job without fine tuned job templates
Chapter 5 - Use the Océ TC4 scanner for copy and scan-to-file jobs
207
To Next Page
Loading...
Need help?
General