Oce PlotWave 750 - Page 230

[73] The cards of the ‘Original’ section at the left side with the active ‘Image’ card
Print section
The ‘Print’ section contains all settings for the printer output, the print. The settings are divided
over the following cards:
• Stamping
• Image
• Layout
• Finishing
• [Sheet]
[74] The cards of the 'Print' section at the left side with an active 'Sheet' card
File section
The ‘File’ section contains all settings for the scan-to-file output. The ‘File’ section is only
available if you have the scan-to-file option installed. The settings are divided over the following
cards:
• Image
• Destination
[75] The cards of the ‘File’ section at the left side with an active ‘Destination’ card
Sections on the operator panel
230
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs