Green button principle
The Océ PlotWave 750 is a very user-friendly system. The scanner, in particular, is very easy to
operate. Basic copy jobs can be performed by simply pressing the green start key on the scanner
operator panel. You have to change the default copy settings with the help of the other settings
on the scanner operator panel only if you want to perform more complex copy jobs.
Templates
The scanner operator panel offers a number of customizable templates for the job settings of a
copy or scan job. The templates allow you to store your preferred job settings. To start a job, you
simply select a template on the operator panel and press the green button. Templates can be
managed in the Océ Express WebTools.
Océ Matrix Logic
®
Océ Matrix Logic
®
is an Océ PlotWave 750 option which allows you to form in one single
operation different copy sets from one set of scanned originals using predefined settings. This
application is free of charge and downloadable from the Océ Express WebTools.
The Océ PlotWave 750 key concepts
24
Chapter 2 - Introduction
To Next Page
Loading...
Need help?
General