• The exact original width (numeric) if a non-standard sized original is used.
3.
Feed your original.
NOTE
With ‘Synchro cut’ the system cuts at the measured length of the original times the zoom factor.
The minimum length is 279 mm or 11 inches. No information loss occurs when 'Synchro cut' is
used.
[103] Auto shift options with synchro cut option active
In
Shift the image
on page 274, you can read how to define the exact location of your image on
the page.
Auto align
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
273
To Next Page
Loading...
Need help?
General