■
Operand [S1] send trigger setting
Set Description
Bit
device
Specify the detection of bit device OFF to ON as a trigger. Specify "BITON" for the keyword "TRIG=",
and set the bit device.
TRIG=BITON,xxxxx
For global device
Specify device code + device number.
Example) "X10", "R1024", "DT12345.6"
Addressable devices: X, Y, R, L, T, C, S, P, E, DT.n, LD.n
For system relays, specify "S".
For a local device
"PB" + PB number + "_" (underscore) + device code + device number
Example) "PB1_X50", "PB80_R512", "PB200_DT102.4"
Addressable devices: X, Y, R, L, T, C, P, E, DT.n, LD.n
Time
Specify sent time. Specify "TIME" for the keyword "TRIG=", and set the time.
TRIG=TIME,xxxx,yyyy
● Setting format of cycle
Cycle Set value of xxxx Set format of yyyy
Every minute /min ss
Every hour /hour mm:ss
Every day /day hh:mm:ss
Every month /mon DD:hh:mm:ss
Every year /year MM:DD:hh:mm:ss
Every week /week hh:mm:ss-w
* Specify the format of yyyy as follows; ss = seconds (0 to 59), mm = minutes (0 to 59), hh = hours
(0 to 23), DD (1 to 31) = days, MM = months (1 to 12), w = weeks (0 to 6)
* Specify w for every week as follows; 0 = Sunday, 1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 =
Thursday, 5 = Friday, 6 = Saturday
Cycle
Specify "CYCLIC" and the following strings in combination for the keyword "TRIG=".
TRIG=CYCLIC,xxxx
● Setting value of cycle time
Cycle unit Set value
Seconds 30SEC
Minutes 1MIN, 2MIN, 3MIN, 4MIN, 5MIN, 6MIN, 10MIN, 15MIN, 30MIN
Hours 1HOUR, 2HOUR, 3HOUR, 4HOUR, 6HOUR, 12HOUR, 24HOUR
* The shortest cycle is 30 seconds.
* Only one cycle time can be set. Setting values such as "1MIN30SEC" cannot be set.
Instructio
n
Specify SMTPcREQ instruction as a trigger. Specify "PROGRAM" for the keyword "TRIG=".
TRIG=PROGRAM
PLC
status
change
Specify "STATUS" and the following strings in combination for the keyword "TRIG=".
TRIG=STATUS,xxxx
Multiple items can be specified. Separate each item with a comma (,).
17.24 SMTPcSET (Mail Transmission Setting)
17-122 WUME-FP7CPUPGR-12
To Next Page
Loading...
Need help?
General
