Panasonic FP7 Series Command Reference Manual

Value Description
DT8
-DT15
- The master unit IPv6 address (link local) is stored.
DT16
-DT23
-
When [Automatically acquire IPv6 address] - [Acquire from router] is selected, the
master unit IPv6 address is stored. For manual setting, "0" is stored.
DT24
-DT31
-
When [Automatically acquire IPv6 address] - [Acquire from DHCP] is selected,
the master unit IPv6 address is stored. For manual setting, "0" is stored.
DT32 H0100 (U64)
The subnet prefix length is stored.
Example) 64
DT33 HFE80
The IPv6 address of the default gateway is stored.
Example) fe80::1
DT34 H0000
DT35 H0000
DT36 H0000
DT37 H0000
DT38 H0000
DT39 H0000
DT40 H0001
DT41 H0001 The type of the IP address is stored. For IPv6, the value is "1".
DT42 HFE80
The destination IPv6 address is stored.
Example) fe80:0011:2233:4455:6677:8899:aabb:ccdd
DT43 H0011
DT44 H2233
DT45 H4455
DT46 H6677
DT47 H8899
DT48 HAABB
DT49 HCCDD
Example 4) When specifying IPv6 address and MAC address
The results are stored in the 44-word area that starts with [D].
[S1]... "IPv6" [S2]... "MAC" [D]...DT0
Value Description
DT0 HFE80
The master unit IPv6 address (manual setting) is stored.
Example) fe80:0011:2233:4455:6677:8899:99aa:aabb
DT1 H0011
DT2 H2233
DT3 H4455
DT4 H6677
DT5 H8899
DT6 H99AA
DT7 HAABB
DT8 - The master unit IPv6 address (link local) is stored.
17.2 ETSTAT (Acquiring Ethernet Unit Information: IP/MAC/Destination)
WUME-FP7CPUPGR-12 17-11

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English