Panasonic FP7 Series Command Reference Manual

Exam
ple 3
S2 "USER=,PASS="
Settings User name: Delete, Password: Delete
Exam
ple 4
S2 "USER=root"
Settings User name: root, Password: Not change
Exam
ple 5
S2 ",PASS=SUNX"
Settings User name: Not change, Password: SUNX
■
Special keyword of operand [S2] setting
Special keyword Description
INITIAL Set an initial value.
KEEP The current setting is not changed.
Setting example
Exam
ple 1
S2 “INITIAL”
Settings User name: root, Password: root
Exam
ple 2
S2 “KEEP”
Settings User name: Not change, Password: Not change
■
Operand [S3] setting
Setting item Settings Setting range
S3
Timeout period
(Can be omitted)
Specify a timeout period.
TOUT=: Time setting (Default: 60 seconds)
30 to 300
seconds
No. of retries
(Can be omitted)
Specify the number of retries.
RTRY=: Number of retries (Default: 3 times)
0 to 3
Retry interval
(Can be omitted)
Specify the retry interval.
RTTM=: Retry interval (Default: 600 seconds)
10 to 86400
seconds
(Note 1) Input a timeout period, number of retries and retry interval separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the detailed setting parameters in the order of the above table.
(Note 4) The retry interval can be specified in 10-second units. It is rounded down to the nearest 10. (Example:
When specifying 38 seconds, it becomes 30 seconds.)
Setting example
Exam
ple 1
S3 “TOUT=30,RTRY=2,RTTM=500”
Settings Timeout period: 30 seconds, No. of retries: 2, Retry interval: 500 seconds
Exam
ple 2
S3 “TOUT=270,RTRY=0,RTTM=4900”
17.16 HTTPcSV (HTTP Client Connected Server Setting)
WUME-FP7CPUPGR-12 17-85

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English