80D-15
AFTER REPAIR
Carry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1
MR-453-X79-80D000$080.mif
LIGHTING
Fault finding – Interpretation of statuses
80D
UCH
Vdiag No.: 09
ET084
CONTINUED
Disconnect the right-hand indicator connector from the UCH.
Check the insulation, continuity, and the absence of interference resistance on the following connections:
• 64S between components 209 and 645.
• MAM between component 209 and earth.
If the connections are faulty and if there is a repair procedure (see Technical Note 6015A (Renault) or Technical
Note 9804A (Dacia), Electrical wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise
replace it.
If the earth and the connections are correct, replace the lighting stalk, component code 209 (see MR 451
Mechanical, 84A, Controls - Signals, Signals lighting switch: Removal - Refitting).
If the fault is still present, contact the Techline.
To Next Page
Loading...
