16A-2
STARTING - CHARGING
Alternator: Removal - Refitting
K9K
16A
II - REFITTING OPERATION
a Refit:
-the alternator with its lower bolt,
-the alternator upper bolt.
a Torque tighten the alternator bolts (21 N.m).
a Connect the connector to the alternator.
a Refit the alternator lead.
a Torque tighten the alternator lead nut (14 N.m).
III - FINAL OPERATION
a Refit the accessories belt (see 11A, Top and front
of engine, Accessories belt: Removal - Refitting,
page 11A-2) .
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
To Next Page
Loading...
