16A-10
STARTING - CHARGING
Starter: Removal - Refitting
K4M
16A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the air resonator (see 12A, Fuel mixture,
Air resonator: Removal - Refitting, page 12A-2) .
a Unclip:
-the gear control cables on the gearbox at (3) using
a screwdriver,
- the gearbox control cable sleeve stops by pressing
at (4) .
Tightening torquesm
starter bolts 44 N.m
starter lead nut 8 N.m
nut on the starter sole-
noid lead
5 N.m
JR5
118882
109149
To Next Page
Loading...
