16A-14
STARTING - CHARGING
Alternator pulley: Removal - Refitting
K4M
16A
a
Loosen the alternator pulley using a pneumatic or
electric wrench.
a
Remove:
-the tools,
- the alternator pulley.
III - REFITTING PREPARATION OPERATION
a parts always to be replaced: Accessories belt
parts always to be replaced: Accessories fixed
roller
parts always to be replaced: Accessories belt
tensioning roller
parts always to be replaced: Accessories ten-
sioning roller bolt
parts always to be replaced: Alternator pulley
117670
117673
Note:
Always use a pneumatic or electric impact
wrench to loosen the alternator pulley
To Next Page
Loading...
