19A-15
COOLING
Coolant pump: Removal - Refitting
K9K, and 796
19A
II - REFITTING OPERATION
a Refit:
-the coolant pump fitted with a new seal,
-the coolant pump bolts.
a Torque tighten in order (1) (2) (3) (4) (5) the bolts of
the coolant pump (10 N.m).
a Apply one or two drops of FRENETANCHE (see Ve-
hicle: Parts and consumables for the repair)
(04B, Consumables - Products) to the coolant pump
bolts.
III - FINAL OPERATION
a Refit the inner timing cover.
a Tighten to torque the inner timing cover bolts (9
N.m).
a Refit the alternator.
a Torque tighten the alternator bolts (21 N.m).
a Connect the alternator electrical connections.
a Refit:
-the timing belt (see 11A, Top and front of engine,
Timing belt: Removal - Refitting, page 11A-17) ,
-the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-2) .
a Fill the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-6) .
a Refit the front bumper (see Front bumper: Remov-
al - Refitting) (55A, Exterior protection).
a Refit:
- the engine undertray,
- the engine undertray bolts,
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Bleed the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-6) .
102262
To Next Page
Loading...
