31A-17
FRONT AXLE COMPONENTS
Front brake disc: Removal - Refitting
31A
III - FINAL OPERATION
a Refit the "brake calliper mounting - brake calliper"
assembly (see 31A, Front axle components, Front
brake calliper mounting: Removal - Refitting,
page 31A-11) .
a Refit the brake pads (see 31A, Front axle compo-
nents, Front brake pads: Removal - Refitting,
page 31A-3)
a Set the wheels straight ahead.
a Clip the cap on the base of the shock absorber while
aligning the marks made with a indelible pencil.
a Refit the front wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Advise the customer to run-in the brake pads (no
harsh braking).
WARNING
In order not to damage the brake hose:
-do not tension the hose,
-do not twist the hose,
-check that there is no contact with the sur-
rounding components.
IMPORTANT
To avoid any accident, bring the pistons, brake
pads and brake discs into contact by depressing
the brake pad several times.
To Next Page
Loading...
