01C-1
VEHICLE BODYWORK SPECIFICATIONS
Vehicle: Identification
01C
I - LOCATION OF VEHICLE IDENTIFICATION
PLATE (A)
II - LOCATION OF THE VEHICLE IDENTIFICATION
NUMBER (B)
III - DETAILED VIEW OF THE VEHICLE
IDENTIFICATION PLATE
Plate (A)
145261
145260
Note:
If the complete body is being replaced, it must be
marked in compliance with the current regulations.
19031
(1) Vehicle type and type number;
this information also appears on
marking (B)
(2) MGVW (Maximum Gross Vehi-
cle Weight)
(3) GTW (Gross train weight, vehi-
cle under load with trailer)
(4) Maximum permissible front axle
load
(5) Maximum permissible rear axle
load
(6) Vehicle technical speciļ¬cations
(7) Paintwork reference number
(8) Equipment level
(9) Vehicle type
(10) Upholstery code
(11) Additional equipment details
(12) Production number
(13) Interior trim code
To Next Page
Loading...
