33A-18
REAR AXLE COMPONENTS
Rear axle rubber bearing: Removal - Refitting
33A
a Check that the marks (M1) and (M2) are correctly
aligned.
a Remove the tool.
III - FINAL OPERATION
a Refit:
-the complete rear axle (see 33A, Rear axle com-
ponents, Complete rear axle system: Removal -
Refitting, page 33A-19) ,
-the rear brake drums (see 33A, Rear axle compo-
nents, Rear brake drum: Removal - Refitting,
page 33A-7) .
a Adjust the rear axle (see Rear axle system: Adjust-
ment) .
a Refit the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Bleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
To Next Page
Loading...
