35A-3
WHEELS AND TYRES
Wheel: Removal - Refitting
35A
a Pretighten the wheel bolts to 30 N.m, with the wheel
suspended, starting with the bolts at the bottom.
a Rotate the wheel through 180˚ to bring the valve into
the bottom position.
a Position the vehicle on its wheels.
a Torque tighten the wheel bolts in order (see 30A,
General information, Front axle system: Tighten-
ing torque, page 30A-16) (30A, General informa-
tion).
a Refit the trim piece.
Note:
Use sockets with protective sheaths in order to
avoid scratching the alloy wheel rims.
To Next Page
Loading...
