37A-49
MECHANICAL COMPONENT CONTROLS
Clutch circuit: Removal - Refitting
JR5, and LEFT-HAND DRIVE
37A
a Connect the pipe to the slave cylinder.
III - FINAL OPERATION
a Refit the expansion bottle.
a Torque tighten the expansion bottle nuts (8 N.m).
a Fill the brake fluid reservoir to the correct level.
a Bleed the clutch circuit (see 37A, Mechanical com-
ponent controls, Clutch circuit: Bleed, page 37A-
37) .
a Refit the engine undertray.
Note:
As you lock the clutch control pipe, you should
hear a safety click.
To Next Page
Loading...
