Renault Duster 2007 - Page 712

57A-5
INTERIOR EQUIPMENT
Dashboard: Removal - Refitting
57A
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-the glovebox cover,
-the rivets,
-the right-hand side trim,
-the right-hand side trim bolts,
-the passenger front airbag (depending on equip-
ment level) (see Passenger's frontal airbag: Re-
moval - Refitting) (88C, Airbags and
pretensioners),
-the dashboard (partially) (this operation requires
two people).
a Connect the connector (8) .
a Refit:
-the diagnostic socket,
-the dashboard (this operation requires two people),
-the dashboard bolts.
a Replace the control panel on the dashboard.
a Clip the covers (3) onto both sides of the dashboard.
III - FINAL OPERATION
a Connect the central trim connectors.
a Fit the central trim assembly.
a Clip on the central trim.
a Refit:
-the radio (see Radio: Removal - Refitting) (86A,
Radio),
-the centre console (see 57A, Interior equipment,
Centre console: Removal - Refitting, page 57A-
10) ,
-the instrument panel (see Instrument panel: Re-
moval - Refitting) (83A, Instrument panel),
-the steering column switch assembly (see Steer-
ing column switch assembly: Removal - Refit-
ting) (84A, Control - Signals),
-the steering wheel (see Steering wheel: Removal
- Refitting) (36A, Steering assembly),
-the driver's front airbag (see Driver's frontal air-
bag: Removal - Refitting) (88C, Airbags and pre-
tensioners),
-the windscreen pillar trims (see Windscreen pillar
trim: Removal - Refitting) (71A, Body internal
trim).
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Unlock the airbag computer using the Diagnostic
tool (see Fault finding - Replacement of compo-
nents) (88C, Airbags and pretensioners).
IMPORTANT
To avoid a fault with or even triggering of pyro-
technic components (airbags or pretensioners),
check the airbag computer using the diagnostic
tool.