62A-13
AIR CONDITIONING
Compressor: Removal - Refitting
AIR CONDITIONING
62A
a Remove:
-the bolt (3) from the pipe retaining clip on the com-
pressor,
-the pipe union bolts (4) on the compressor.
a
a Disconnect the compressor pipes.
a Fit blanking plugs in the pipe openings.
a Disconnect the compressor connector (5) .
a Remove:
- the compressor bolts (6) ,
- the compressor.
K9K
145750
WARNING
In order to avoid any refrigerant leaks, do not
damage (deform, twist, etc.) the pipe.
K4M
145191
To Next Page
Loading...
