62A-19
AIR CONDITIONING
Refrigerant pipe seal: Removal - Refitting
62A
- (see Compressor - intermediate pipe connect-
ing pipe: Removal - Refitting) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
a Remove the seal from the connecting pipe using the
tool (Car. 1363).
a Fit blanking plugs.
a Clean the surface of the pipe using ENGINE
CLEANER (see Vehicle: Parts and consumables
for the repair) (04B, Consumables - Products).
a Use a compressed air nozzle to blow on the sur-
face and the seal of the connecting pipe.
WARNING
To avoid damaging the surface of the air condi-
tioning pipes when removing the seals, do not
use a tool with a metallic end piece.
143881
143880
143882
To Next Page
Loading...
