62C-8
V1
MR-453-X79-62C000$010.mif
CLIMATE CONTROL
Fault finding – Introduction
62C
5. FAULT FINDING LOG
You will always be asked for this log:
• when requesting technical assistance from Techline,
•for approval requests when replacing parts for which approval is mandatory,
•to be attached to monitored parts for which reimbursement is requested. The log is needed for warranty
reimbursement, and enables better analysis of the parts removed.
6. SAFETY INSTRUCTIONS
Safety rules must be observed during any work on a component to prevent any material damage or personal injury:
– check the battery voltage to avoid incorrect operation of computer functions,
– do not smoke,
– use the proper tools.
IMPORTANT!
IMPORTANT
Any fault on a complex system requires thorough fault finding with the appropriate tools.
The FAULT FINDING LOG, which should be completed during the fault finding procedure,
ensures a record is kept of the procedure carried out. It is an essential document when
consulting the manufacturer.
IT IS THEREFORE ESSENTIAL THAT THE FAULT FINDING LOG IS FILLED OUT EVERY TIME IT IS
REQUESTED BY TECHLINE OR THE WARRANTY RETURNS DEPARTMENT.
To Next Page
Loading...
