10A-66
ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine - gearbox assembly: Removal - Refitting
K9K, and 796
10A
-the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-6) .
a Disconnect the connector (9) from the water detec-
tion sensor on the diesel filter.
a Unclip the water detection connector on the diesel
filter mounting at (10) .
a Disconnect:
- the fuel supply pipe (11) ,
- the fuel return pipe (12) .
a Fit blanking plugs on the fuel supply pipe.
a Unclip the pipes at (13) .
a Disconnect the intercooler ducts (see 12B, Turbo-
charging, Intercooler: Removal - Refitting, page
12B-8) .
145502
145503
WARNING
To avoid any corrosion or damage, protect the
areas on which fuel is likely to run.
To Next Page
Loading...
